fbpx

Uzin PE 414 Turbo 6kg

WJD Flooring is the number one supplier in the UK for Uzin PE 414 Turbo damp proof membranes.nnnnWe provide Uzin PE 414 Turbo damp proof membrane to a variety of flooring contractors and clients within all sectors of industry.nnnnUzin PE 414 Turbo damp proof membrane is designed to suppress moisture from within subfloors.nnnnUzin PE 414 Turbo damp proof membrane is an excellent choice of damp proof membrane and is available in different sized units.nnnnThe British Standard BS8203 requires a Uzin PE 414 Turbo damp proof membrane when the relative humidity (RH) in sub-floors is greater than 75% RH.nnnnThe approximate coverage of Uzin PE 414 Turbo 6Kg is up to 60m2 after 1 coat.

Description

WJD Flooring is the number one supplier in the UK for Uzin PE 414 Turbo damp proof membranes.nnWe provide Uzin PE 414 Turbo damp proof membrane to a variety of flooring contractors and clients within all sectors of industry.nnUzin PE 414 Turbo damp proof membrane is designed to suppress moisture from within subfloors.nnUzin PE 414 Turbo damp proof membrane is an excellent choice of damp proof membrane and is available in different sized units.nnThe British Standard BS8203 requires a Uzin PE 414 Turbo damp proof membrane when the relative humidity (RH) in sub-floors is greater than 75% RH.nnThe approximate coverage of Uzin PE 414 Turbo 6kg is up to 60m2 after 1 coat.nn1-component polyurethane rapid primer for use prior to bonding of wood flooring with reaction resin adhesives. To act as a strengthener and barrier-coat on absorbent and non-absorbent surfaces. As a barrier primer on moisture- resistant substrates with high residual moisture.nSuitable a s/ for:n3 a rapid primer prior to bonding wood flooring with UZIN reaction resin adhesives on cement, calcium sulphate and stone-wood screeds, concrete, chipboard and exist – ing surfaces with well-bonded adhesive residues 3 strengthening of absorbent, mineral surfaces such as cement-, calcium sulphate-, magnesia- and stone-wood- screeds, concrete, etc. 3 priming on existing surfaces with well-bonded residues of smoothing compounds or water-soluble adhesives (e .g. sulphite adhesives) 3 priming on moisture-sensitive surfaces such as chip – board and OSB board, as well as gypsum-based dry screed materials 3 barrier-priming with 2 coats on cement-based, moisture- resistant substrates such as cement screeds and con – crete, up to a residual moisture content of 4 CM-% 3 priming, when grit-blinded with UZIN Quartz Sand 0.8, prior to smoothing and levelling work with UZIN com – pounds 3 use in domestic, commercial and project locations 3 UZIN PE 414 Turbo allows for fast and time-saving installation of bonded wood flooring. The primer cures on the surface extremely quickly, then wood flooring can be bonded with UZIN reaction resin adhesives as soon as the primed surface can be walked on. This is often possible after only approx. 30 – 50 mins. 3 warm water underfloor heating and for exposure to castor wheels in accordance with DIN EN 1 2 529nProduct Propertie s/ Benefits:nReady to use, rapid polyurethane primer. Low viscosity, easy to apply, one-component, therefore no material waste due to mixing too much product.nBinder: Moisture-cured, modified polyurethane pre-polymers.n3 Very rapid hardening 3 Easy roller or trowel application 3 Excellent penetration 3 Water-free 3 Solvent-free 3 EMICODE EC 1 R PLU S/Very low emission PLUSnTechnical Data:nPackaging: plastic canisternPacksize: 6 kg, 12 kgnShelf life: min. 9 monthsnColour: brown nWorking temperature: min. 1 5°C/ 59°F at floor levelnConsumption: 80 – 150 g/m2 per coatnCuring times: see chart on the back side

Enquire about this product

Please fill out the form below and a member of our team will get back to you.



By Checking this box you understand that your details will be emailed to the relevant people to deal with your request and may be stored on our website for reference purposes. Please see our Privacy Policy for more information.

Call Now Button