fbpx

Tremco SX302 Moisture Tolerant 26.3kg

£21.60 per unit

Tremco SX302 is a smoothing compound and is one of the sub-floor preparation products.

This floor screed is a versatile smoothing compound for levelling uneven floors before laying decorative floor coverings.

Tremco SX302 is one of the Tremco smoothing compounds and is available in 26.4kg tubs.

Tremco SX302 self levelling screed is suitable for use over most substrates and adhesive residues.

Categories: , , Tag:

Description

Tremco SX302 is a smoothing compound and is one of the sub-floor preparation products.

This floor screed is a versatile smoothing compound for levelling uneven floors before laying decorative floor coverings.

Tremco SX302 is one of the Tremco smoothing compounds and is available in 26.4kg tubs.

Tremco SX302 self levelling screed is suitable for use over most substrates and adhesive residues.

Tremco SX302 is a moisture tolerant
cement based latex underlayment
for use in domestic, light commercial
and industrial environments as an
underlayment, prior to application of
carpet, wood and vinyl flooring.
Standards
All aspects of the installation must be
in accordance with the requirements of
BS 8204, BS 8203 (Installation of
Resilient Floorcoverings) or BS 5325
(Installation of Textile Floorcoverings)
and supplementary specifications.
USAGE GUIDELINES
Preparation
Subfloor preparation is of key
importance with products of this nature.
The surface should be free of oil,
grease, weak material, laitence and
other contaminates. All subfloors,
including concrete and highly polished
surfaces (e.g. powerfloated concrete,
marble, terrazzo and ceramic tiles),
should always be mechanically
textured. The floor should then be
either vacuumed or swept clean.
Sound, stable subfloor construction is
essential. The substrate should have a
surface pull-off strength of >1.5 N/mm².
It is acceptable to apply Tremco SX302
to sound, minimised, non-water soluble
adhesive residues that are firmly
bonded on dry floors only; however, this
product is not suitable for application
on to bitumen adhesive residues.
Bitumen adhesive residues should be
completely removed. It is recognised
that the success of the system is
dependent on the stability and bond of
the adhesive to the substrate.
Priming
No primer is necessary for absorbent
surfaces unless particularly dusty. Use
Tremco CS150 Acrylic Primer on porous
surfaces and Tremco CS100 Epoxy
Primer on non-porous surfaces.

Reviews

There are no reviews yet.

Be the first to review “Tremco SX302 Moisture Tolerant 26.3kg”

Enquire about this product

Please fill out the form below and a member of our team will get back to you.



By Checking this box you understand that your details will be emailed to the relevant people to deal with your request and may be stored on our website for reference purposes. Please see our Privacy Policy for more information.

Call Now Button