fbpx

Tremco ES200 Fastrak Universal 6kg

£115.00 per unit

WJD Flooring is the number one supplier in the UK for Tremco ES200 Fastrak Universal damp proof membranes.

We provide Tremco ES200 Fastrak Universal damp proof membrane to a variety of flooring contractors and clients within all sectors of industry.

Tremco ES200 Fastrak Universal damp proof membrane is designed to suppress moisture from within subfloors.

Tremco ES200 Fastrak Universal damp proof membrane is an excellent choice of damp proof membrane and is available in different sized units.

The British Standard BS8203 requires a Tremco ES200 Fastrak Universal damp proof membrane when the relative humidity (RH) in sub-floors is greater than 75% RH.

The approximate coverage for Tremco ES200 Fastrak Universal 6kg see technical advice.

Description

WJD Flooring is the number one supplier in the UK for Tremco ES200 Fastrak Universal damp proof membranes.

We provide Tremco ES200 Fastrak Universal damp proof membrane to a variety of flooring contractors and clients within all sectors of industry.

Tremco ES200 Fastrak Universal damp proof membrane is designed to suppress moisture from within subfloors.

Tremco ES200 Fastrak Universal damp proof membrane is an excellent choice of damp proof membrane and is available in different sized units.

The British Standard BS8203 requires a Tremco ES200 Fastrak Universal damp proof membrane when the relative humidity (RH) in sub-floors is greater than 75% RH.

The approximate coverage for Tremco ES200 Fastrak Universal 6kg see technical advice.

Tremco ES200 Fastrak Universal DPM
is a solvent free, two part, epoxy based
damp proof membrane which achieves
emicode EC1 status.
Usage / Purpose
Tremco ES200 Fastrak Universal
DPM has been developed specifically
for suppressing residual moisture in
concrete and sand/cement subfloors
and provides a guaranteed surface
damp proof membrane with a single
coat liquid application.
Colour
When mixed: Gun Metal Grey
Part 1: Dark Grey
Part 2: Brown
Packaging
Units of 6 kg in metal containers.
Availability
Direct from Tremco illbruck (see back
of leaflet for address and telephone
details) or via local and national
distributors.
TECHNICAL INFORMATION
Composition
Tremco ES200 Fastrak Universal
DPM is a flexibilised epoxy, which
contains wetting aids and penetrants to
maximise adhesion, flow control agents
to minimise pinholes and overlapping
platelets which provide an extra barrier
to moisture vapour.
Performance (Typical Values)
MIXING RATIO
Mix full kits only
WORKING POT LIFE
Due to the fast cure profile designed
into this product, all product should
be applied onto the floor in a ribbon
immediately after mixing. This will allow
for the maximum working life to be
achieved and facilitate application and
improve coverage.
HARDENING TIME
+20°C: 3 to 4 hours
+15°C: 4 to 6 hours
+10°C: 7 to 10 hours
SERVICE TEMPERATURE RANGE
-20°C to +80°C
WATER RESISTANCE
Excellent
CHEMICAL RESISTANCE
Good

Reviews

There are no reviews yet.

Be the first to review “Tremco ES200 Fastrak Universal 6kg”

Enquire about this product

Please fill out the form below and a member of our team will get back to you.



By Checking this box you understand that your details will be emailed to the relevant people to deal with your request and may be stored on our website for reference purposes. Please see our Privacy Policy for more information.

Call Now Button