SO Feather Finish Screed 11kg

£39.00 £46.80(inc vat) per unit

SO Feather Finish is a repair compound and is one of the sub-floor preparation products.

SO Feather floor screed is a versatile smoothing compound for levelling uneven floors before laying decorative floor coverings.

SO Feather Finish self levelling screed is suitable for use over most substrates and adhesive residues.

SKU: 12762 Category:

Description

SO Feather Finish is a repair compound and is one of the sub-floor preparation products.
SO Feather floor screed is a versatile smoothing compound for levelling uneven floors before laying decorative floor coverings.
SO Feather Finish self levelling screed is suitable for use over most substrates and adhesive residues.
SO  Feather Finish drys rapidly and provides a high bond to concrete, plywood, cement/sand screeds, existing sub-floor smoothing compounds and even existing ceramic tiles without the use of primers.
Use SO  Feather Finish for patching, filling and feather finishing, daywork joints, ridges, gouges, depressions, uneven trowel marks, etc., in the sub-floor, as well as smoothing joints between staggered plywood sheets.
SUB-FLOOR PREPARATION SO  Feather Finish is designed for use in commercial and domestic locations where the installation involves the use of resilient sheet or floorcoverings such as vinyl sheet or tiles, carpet etc.
The cement/sand screed, plywood or ceramic tiled sub-floors must be dry, sound and clean, free of dust, grease and other barriers that might impair adhesion to the base.
In domestic applications only, SO  Feather Finish may be installed over existing adhesive residues which are thin, sound and well bonded. The residues must not be affected by either the initial wetting from the applied mortar or the adhesive used to install the new floorcovering. SO  Feather Finish is not recommended over adhesive residues in commercial situations.
MIXING/INSTALLATION SO  Feather Finish is mixed with clean water (2 parts by volume of powder to 1 part by volume of water) to achieve an easily trowelled, non-flowing slump free consistency. SO  Feather Finish is easily applied with a steel trowel and can be used to form a true feather edge up to 3mm in thickness.
SO  Feather Finish is designed specifically for very thin smoothing applications typically 1mm thick or less, but may be used up to 3mm thick in one application. For thicknesses of 3mm (not exceeding 12mm) it is recommended to build up in thin applications or alternatively consult the ARDEX A45 data sheet.
NOTE: When applying SO  Feather Finish to wooden floors the maximum total depth is 3mm.
Providing the SO  Feather Finish layer has hardened sufficiently and the adhesive trowel does not damage the mortar surface, the floorcovering may be installed, even if the surface appears to be damp.
A skim coat may be sufficiently hard enough after 15 minutes but obviously will depend on the absorbency of the sub-floor and site temperatures. Thicker applications will require additional drying time.
NOTE: Select a flooring adhesive that is compatible with the sub-floor beneath the SO  Feather Finish, otherwise a 3mm smoothing layer wiII be necessary. Apply at temperatures above 5oC.
POT LIFE Approximately 15 minutes at 2OoC. NOTE: The pot life will vary with ambient conditions – lower temperatures will extend and higher temperatures will shorten the pot life and drying time.
COVERAGE An 11kg bag of SO  Feather Finish, when used to smooth a plywood sub-floor, will give up to approximately 50m2 of coverage when a skim coat is applied. Thicker applications will reduce coverage, e.g. 10m2 at a 1mm thickness.

Reviews

There are no reviews yet.

Be the first to review “SO Feather Finish Screed 11kg”

Your email address will not be published. Required fields are marked *

Enquire about this product

Please fill out the form below and a member of our team will get back to you.



By Checking this box you understand that your details will be emailed to the relevant people to deal with your request and may be stored on our website for reference purposes. Please see our Privacy Policy for more information.