fbpx

Laybond One Coat DPM 10kg

£140.00 per unit

WJD Flooring is the number one supplier in the UK for Laybond One Coat damp proof membranes.

We provide Laybond One Coat damp proof membrane to a variety of flooring contractors and clients within all sectors of industry.

Laybond One Coat damp proof membrane is designed to suppress moisture from within subfloors.

Laybond One Coat damp proof membrane is an excellent choice of damp proof membrane and is available in different sized units.

The British Standard BS8203 requires a damp proof membrane when the relative humidity (RH) in sub-floors is greater than 75% RH.

The approximate coverage for Laybond One Coat 5kg see technical advice.

Description

WJD Flooring is the number one supplier in the UK for Laybond One Coat damp proof membranes.

We provide Laybond One Coat damp proof membrane to a variety of flooring contractors and clients within all sectors of industry.

Laybond One Coat damp proof membrane is designed to suppress moisture from within subfloors.

Laybond One Coat damp proof membrane is an excellent choice of damp proof membrane and is available in different sized units.

The British Standard BS8203 requires a damp proof membrane when the relative humidity (RH) in sub-floors is greater than 75% RH.

The approximate coverage for Laybond One Coat 5kg see technical advice.

A two part, epoxy system containing the exact quantities of resin and hardener, ready for mixing together. Curing is by a stoichiometric chemical reaction giving a gloss finish. USES For suppressing residual construction moisture in cementitious subfloors enabling floor coverings to be installed earlier in building projects. Screedmaster One Coat DPM and Screedmaster One Coat Accelerator are both solvent free products and are suitable for use in all project work including hospitals, schools, retail outlets and commercial projects. On a smooth, power floated concrete base, a single coat application can provide protection up to a maximum hygrometer reading of 97% RH. Moisture readings quoted are based on BS 8203 using a properly calibrated and insulated surface hygrometer. PREPARATION Ensure the subfloor is clean, structurally sound, surface dry and free from laitance, dust, dirt or any other contaminant that may prevent adhesion to the substrate. Remove all surface water prior to application. Highly polished surfaces may require light shot blasting to assist penetration and/or adhesion. If the concrete contains either a curing agent or surface hardener, these must be removed by either shot blasting or mechanical abrasion. CONDITIONING Store the product for 24 hours prior to use in temperature conditions between 15ºC and 25ºC. Storage under colder temperatures may result in a more viscous consistency that will make application more difficult. Storage under higher temperatures will reduce the working pot life.
fast track installations
TYPE OF SOLVENT Solvent Free
APPROX. COVERAGE Up to 25m2 per 10kg kit Up to 12.5m2 per 5kg kit
APPLICATION TEMP. LIMITS 10ºC to 30ºC
SERVICE TEMP. LIMITS -20ºC to 60ºC
POT LIFE Approx 30 minutes at 20ºC.
CURING TIME (at given floor temp) 8 Hours @ 20ºC, 16 Hours @ 10ºC
CURING TIME (with Accelerator) 3 Hours @ 20ºC, 6 Hours @ 10ºC
FILM THICKNESS Approx. 290 microns minimum at 25m2 per 10kg kit

Reviews

There are no reviews yet.

Be the first to review “Laybond One Coat DPM 10kg”

Your email address will not be published. Required fields are marked *

Enquire about this product

Please fill out the form below and a member of our team will get back to you.



By Checking this box you understand that your details will be emailed to the relevant people to deal with your request and may be stored on our website for reference purposes. Please see our Privacy Policy for more information.

Call Now Button