Instarmac Ultra Floor Flooring Level IT One HDB 25kg

£19.80 £23.76(inc vat) per unit

Instarmac Ultra Floor Flooring Level IT One HDB is a smoothing compound and is one of the sub-floor preparation products.

This floor screed is a versatile smoothing compound for levelling uneven floors before laying decorative floor coverings.

Instarmac Ultra Floor Flooring Level IT One HDB is one of the Instarmac Ultra Floor Flooring smoothing compounds and is available in 25kg tubs.

Instarmac Ultra Floor Flooring Level IT One HDB self levelling screed is suitable for use over most substrates and adhesive residues.

Description

Instarmac Ultra Floor Flooring Level IT One HDB is a smoothing compound and is one of the sub-floor preparation products.

This floor screed is a versatile smoothing compound for levelling uneven floors before laying decorative floor coverings.

Instarmac Ultra Floor Flooring Level IT One HDB is one of the Instarmac Ultra Floor Flooring smoothing compounds and is available in 25kg tubs.

Instarmac Ultra Floor Flooring Level IT One HDB self levelling screed is suitable for use over most substrates and adhesive residues.

Ultra Floor Level IT one HDB is a single part concrete floor leveller containing a compound of specially graded fillers, fine cements and polymers for smoothing and levelling internal floors with irregular substrates, prior to the application of decorative surface flooring. Ultra Floor Level IT one HDB has a set time of approximately 3 hours and can be laid at depths from 3mm to 50mm. It is suitable for use on all common building substrates including concrete, sand/cement screeds, flooring grade asphalt, floors with under floor heating, and can be used over screwed and fixed boarded floors at 300mm centres. SURFACE PREPARATION Before application the surface being adhered to must be clean, firm, dry, free of dust, dirt, oil and grease or any other contaminating barriers. Remove any flaking or peeling layers. The substrate must be strong enough to support the weight of the leveller, adhesive and covering being fixed. Direct to earth sub-floors must have an effective damp proof membrane. All existing damp proof membranes must be functioning effectively. TOOLS • Suitable steel trowel • Spiked roller • Electric drill and paddle PRIMING Porous and timber surfaces should be primed using Ultra Floor Prime IT AR or Ultra Tile Prime IT FP. This will help to prevent water penetration, increase bond strength and reduce the possibility of failure. Ultra Floor Prime IT AR or Ultra Tile Prime IT FP should be diluted 1 part primer to 3 parts water and applied with a roller, brush or spray. Allow the liquid to become translucent and nearly dry before applying Ultra Floor Level IT one HDB. Very porous substrates may require an initial coat diluted 5 parts water to 1 part primer before applying the above.

Reviews

There are no reviews yet.

Be the first to review “Instarmac Ultra Floor Flooring Level IT One HDB 25kg”

Your email address will not be published. Required fields are marked *

Enquire about this product

Please fill out the form below and a member of our team will get back to you.



By Checking this box you understand that your details will be emailed to the relevant people to deal with your request and may be stored on our website for reference purposes. Please see our Privacy Policy for more information.