Instarmac Ultra Floor Flooring Level IT HD Top 25kg

£20.95 £25.14(inc vat) per unit

Instarmac Ultra Floor Flooring Level IT HD Top is a smoothing compound and is one of the sub-floor preparation products.

This floor screed is a versatile smoothing compound for levelling uneven floors before laying decorative floor coverings.

Instarmac Ultra Floor Flooring Level IT HD Top is one of the Instarmac Ultra Floor Flooring smoothing compounds and is available in 25kg units.

Instarmac Ultra Floor Flooring Level IT HD Top self levelling screed is suitable for use over most substrates and adhesive residues.

Description

Instarmac Ultra Floor Flooring Level IT HD Top is a smoothing compound and is one of the sub-floor preparation products.

This floor screed is a versatile smoothing compound for levelling uneven floors before laying decorative floor coverings.

Instarmac Ultra Floor Flooring Level IT HD Top is one of the Instarmac Ultra Floor Flooring smoothing compounds and is available in 25kg units.

Instarmac Ultra Floor Flooring Level IT HD Top self levelling screed is suitable for use over most substrates and adhesive residues.

Ultra Floor Level IT HD top is a cementitious self-levelling floor topping designed for warehouse and industrial floors when rapid strength gain and durability are a high priority. It can be pumped up to 2000m2 per day with an application depth of 5mm-15mm, providing a highly durable floor covering that is quick and cost effective to apply. SURFACE PREPARATION The preparation of the substrate is very important to ensure the most effective use of Level IT HD top. The concrete substrate must be firm, hard and free of old coatings, concrete laitance and any contaminants which may impair adhesion during the application. The concrete must have a profiled textured surface, which can be achieved by captive shot blasting, grinding or milling. For areas, which are contaminated by oil or grease, H.C.A (Hot Compressed Air) treatment may be required. All dust and debris must be vacuumed away to leave a clean, dust free surface. PRIMING Priming is required using Ultra Floor Prime IT AR acrylic primer. Apply 2 coats of primer by brush (for most aplications onto porous surfaces). For the 1st coat, dilute Prime IT AR with clean water at 1:3 ratio. Apply to prepared surface and allow to dry (normally overnight). For the 2nd coat, dilute Prime IT AR with clean water at 1:1 ratio and appy to previous coat. Allow to dry and ensure film is translucent (milky white when first applied and uncured) before applying Level IT HD Top. Primed areas should be overlaid with Level IT HD Top within 36 hours of the priming operation. NOTE: On very porous surfaces or rough faced substrates a 3rd coat of primer may be required at the 1:1 dilution ratio. Always ensure the primer is applied thoroughly and uniformly over the complete surface. Do not allow ‘ponding’, causing thick, slow drying sections of primer, or areas of ‘dry’ patches indicating missed sections. MIXING Level IT HD top should be mixed and applied either by hand or by specialist mixer/pump. For pump application contact Instarmac’s Technical department for a list of contractors. For hand application place 4.5 litres of clean potable water into a clean suitable container. Slowly add, whilst mixing, the contents of the 25kg bag of Level IT HD top. Mix with a slow speed drill and paddle until a homogeneous mix is attained.

Reviews

There are no reviews yet.

Be the first to review “Instarmac Ultra Floor Flooring Level IT HD Top 25kg”

Your email address will not be published. Required fields are marked *

Enquire about this product

Please fill out the form below and a member of our team will get back to you.



By Checking this box you understand that your details will be emailed to the relevant people to deal with your request and may be stored on our website for reference purposes. Please see our Privacy Policy for more information.