fbpx

Fball F76 HP 2.5kg One Coat Accelerated Waterproof Membrane

£45.00 per unit

WJD Flooring is the number one supplier in the UK for Fball F76 HP 2.5kg damp proof membranes.

We provide Fball F76 HP damp proof membrane to a variety of flooring contractors and clients within all sectors of industry.

Fball F76 HP damp proof membrane is designed to suppress moisture from within subfloors.

Fball F76 HP damp proof membrane is an excellent choice of damp proof membrane and is available in different sized units.

The British Standard BS8203 requires a Fball F76 HP 2.5kg damp proof membrane when the relative humidity (RH) in sub-floors is greater than 75% RH.

The approximate coverage for Fball F76 HP 2.5kg see technical advice.

Description

WJD Flooring is the number one supplier in the UK for Fball F76 HP 2.5kg damp proof membranes.

We provide Fball F76 HP damp proof membrane to a variety of flooring contractors and clients within all sectors of industry.

Fball F76 HP damp proof membrane is designed to suppress moisture from within subfloors.

Fball F76 HP damp proof membrane is an excellent choice of damp proof membrane and is available in different sized units.

The British Standard BS8203 requires a Fball F76 HP 2.5kg damp proof membrane when the relative humidity (RH) in sub-floors is greater than 75% RH.

The approximate coverage for Fball F76 HP 2.5kg see technical advice.

STOPGAP F76 HP is a fast curing, solvent free two part epoxy resin system which
cures to provide a waterproof surface membrane. STOPGAP F76 HP impedes the
passage of residual construction moisture from affecting subsequent floorcovering
installations, therefore allowing early installation of floorcoverings in fast track building
programs. STOPGAP F76 HP is pigmented blue to allow the user to visually control
coverage uniformity. It can be used to isolate residual construction moisture where
relative humidity values are below 92%.
Colou Blue Consistency liquid Coverage 3m2 per kg Working Time 30 minutes at an ambient temperature of 20ºC Cure Time Approximatley 3 hours an ambient temperature of 20ºC
Pour the product onto the floor immediately after mixing. Spread the membrane using
the supplied trowel to obtain the correct coat weight. Then, use a roller pre-wetted
with the membrane to obtain an even, pinhole free coating, ensuring that the coverage
rate quoted is not exceeded. It is essential that the membrane hardens to form a
continuous coating, free from pinholes or weak spots and that it has a glossy blue
finish over the whole surface. When applied to very absorbent surfaces, the membrane
can be absorbed into the subfloor leaving a subdued shine, in such instances or where
pinholes and weak spots are evident, a second application will be required, within
6 hours at 20o
C. When the membrane has fully cured apply neat STOPGAP P131
General Purpose Primer before applying a smoothing underlayment.
Under certain conditions it may be possible to apply a suitable adhesive such as
STYCCOBOND F40, F41, F46 or B95 direct to the fully cured membrane.

Reviews

There are no reviews yet.

Be the first to review “Fball F76 HP 2.5kg One Coat Accelerated Waterproof Membrane”

Your email address will not be published. Required fields are marked *

Enquire about this product

Please fill out the form below and a member of our team will get back to you.



By Checking this box you understand that your details will be emailed to the relevant people to deal with your request and may be stored on our website for reference purposes. Please see our Privacy Policy for more information.

Call Now Button