fbpx

Fball F75 20kg Two Coat Waterproof Membrane

£196.00 £235.20(inc vat) per unit

WJD Flooring is the number one supplier in the UK for Fball F75 damp proof membranes.

We provide Fball F75 damp proof membrane to a variety of flooring contractors and clients within all sectors of industry.

Fball F75 damp proof membrane is designed to suppress moisture from within subfloors.

Fball F75 damp proof membrane is an excellent choice of damp proof membrane and is available in different sized units.

The British Standard BS8203 requires a Fball F75 damp proof membrane when the relative humidity (RH) in sub-floors is greater than 75% RH.

The approximate coverage for Fball F75 20kg see technical advice.

Description

WJD Flooring is the number one supplier in the UK for Fball F75 damp proof membranes.

We provide Fball F75 damp proof membrane to a variety of flooring contractors and clients within all sectors of industry.

Fball F75 damp proof membrane is designed to suppress moisture from within subfloors.

Fball F75 damp proof membrane is an excellent choice of damp proof membrane and is available in different sized units.

The British Standard BS8203 requires a Fball F75 damp proof membrane when the relative humidity (RH) in sub-floors is greater than 75% RH.

The approximate coverage for Fball F75 20kg see technical advice.

STOPGAP F75 is a solvent free two part epoxy resin system which cures to provide
a waterproof surface membrane. STOPGAP F75 impedes the passage of residual
construction moisture and rising damp from affecting subsequent floorcovering
installations, therefore allowing early installation of floorcoverings in fast track building
programmes.
STOPGAP F75 is pigmented red to allow the user to visually control coverage
uniformity. It can be used to isolate residual construction moisture where relative
humidity values are above 92%.

Consistency Liquid
Coverage3.5m2 per kg – 1st coat / 5.0m2 per kg – 2nd coat
Working Time40 minutes or 30 minutes with STOPGAP ACCELERATOR, at an
ambient temperature of 20ºC.
Cure Time This greatly depends on temperature. At an ambient temperature
of 20ºC allow 7 – 15 hours between coats. The second coat should
be left 18 – 24 hours before application of primer or adhesive.
STOPGAP ACCELERATOR reduces the cure time to approximately
3 hours between coats and for overlaying the second coat at an
ambient temperature of 20ºC.
Colour Red

Reviews

There are no reviews yet.

Be the first to review “Fball F75 20kg Two Coat Waterproof Membrane”

Your email address will not be published. Required fields are marked *

Enquire about this product

Please fill out the form below and a member of our team will get back to you.



By Checking this box you understand that your details will be emailed to the relevant people to deal with your request and may be stored on our website for reference purposes. Please see our Privacy Policy for more information.

Call Now Button