fbpx

Ardex DPM 1C 10kg

£175.20 per unit

WJD Flooring is the number one supplier in the UK for Ardex DPM 1C damp proof membranes.

We provide Ardex DPM 1C damp proof membrane to a variety of flooring contractors and clients within all sectors of industry.

Ardex DPM 1C damp proof membrane is designed to suppress moisture from within subfloors.

Ardex DPM 1C damp proof membrane is an excellent choice of damp proof membrane and is available in different sized units.

The British Standard BS8203 requires a Ardex DPM 1C damp proof membrane when the relative humidity (RH) in sub-floors is greater than 75% RH.

The approximate coverage for Ardex DPM 1C 10kg seek technical advice.

Description

WJD Flooring is the number one supplier in the UK for Ardex DPM 1C damp proof membranes.

We provide Ardex DPM 1C damp proof membrane to a variety of flooring contractors and clients within all sectors of industry.

Ardex DPM 1C damp proof membrane is designed to suppress moisture from within subfloors.

Ardex DPM 1C damp proof membrane is an excellent choice of damp proof membrane and is available in different sized units.

The British Standard BS8203 requires a Ardex DPM 1C damp proof membrane when the relative humidity (RH) in sub-floors is greater than 75% RH.

The approximate coverage for Ardex DPM 1C 10kg seek technical advice.

ARDEX DPM 1C is a one coat solvent free, low viscosity, two component flexibilised epoxy resin, supplied in pre-gauged units of 6kg, 10kg and 25kg units. After hardening, ARDEX DPM 1C produces a membrane which can accommodate hygrometer readings up to 98% with high inherent bond strength. ARDEX DPM 1C has excellent resistance to water, grease, oil, aqueous salt solution and dilute mineral and organic acids.

ARDEX DPM 1C has been specifically developed to provide either a DPM, or to suppress residual moisture in concrete slabs and cement/sand screeds which are well compacted and sound, where readings of up to 98% RH are measured. ARDEX DPM 1C can be used as a damp proof membrane that deals with damp concrete where a structural damp proof membrane is not present or is ineffective, with the risk of rising damp. A thinner application may be used to suppress residual moisture in concrete slabs and sand cement screeds which are well compacted and sound, where readings of up to 92% RH are measured. See table opposite for details. ARDEX DPM 1C is suitable for heated concrete and sand cement screeds. The surface temperature should not exceed 27°C in accordance with BS 8203 and BS 5325.

Density at 20°C: 1.54
Working Time: 20 minutes at 20°C
Over Coating if required: 6-8 hours at 20°C
Walkability at 20°C: after 6 hours
Colour: Black

Reviews

There are no reviews yet.

Be the first to review “Ardex DPM 1C 10kg”

Enquire about this product

Please fill out the form below and a member of our team will get back to you.



By Checking this box you understand that your details will be emailed to the relevant people to deal with your request and may be stored on our website for reference purposes. Please see our Privacy Policy for more information.

Call Now Button